• Roof Material
  Strong polyethylene tarpaulin
• Roof Material Weight
  300 g/m²
• Sidewall Material
  Strong polyethylene tarpaulin
• Sidewall Material Weight
  300 g/m²
• Frame
  Galvanised steel tubes
• Colour
  White
• Side Height (m)
  4.5
• Product Number
  ST03740
• Width (m)
  4
• Tubes/fittings (mm)
  60x1.8 mm
• Weight (kg)
  773
• Length (m)
  14
• Ridge Height (m)
  5.5
• UV-resistant
  UV-resistant
• Water Resistance
  100% Waterproof
• Port WxH (m)
  3,4x4,4/5,3

• Sturdy and strong storage shelter for secure storage
• 2 large doors secure easy access
• Construction secures room for working on the boat and car
• Sturdy and durable quality for both frame and cover
• Construction provides air circulation
• Cover is waterproof and UV-resistant
• Rip stop-function will limit damage in the event of accident

Storage shelters from Dancover are designed and made to store sailboats, motor boats, campers and caravans in many different sizes. The well thought out details and great functionality make the multiGarage storage shelters perfect for storing boats while on land, or various vehicles when not in use for a short or long period. The boat or the car will be perfectly protected from the rain, snow, sun or wind, and due to the spaciousness of the storage tent, you will have room to work on the boat or vehicle and at the same time be sheltered while working.

It means that preparing for the upcoming season will be easy without having to worry about the weather. Another benefit of storing your boat and more in a multiGarage storage shelter is that you do not need to worry about the bird droppings on the boat that one usually has to deal with in and around the harbour as well as when the vehicle is parked under large trees .

Storage shelters in a sturdy quality

Storage shelters from Dancover have a frame that is bolted together with heavy bolts and stabilised with heavy purlins and wind stabilisers. This provides maximum strength to the whole structure, which has large square steel footplates, and provides a sturdy foundation on the ground. Storage shelters are made with a strong steel frame and are constructed with tubes built to last a long time due to the sturdy and galvanised steel tubes. You assemble the frame in advance or directly around the boat or car. It is important to secure the multiGarage storage shelter with the included ground pegs so it is safe in case of a powerful wind. Furthermore, the cover has a dirt skirt of approximately 1 m, which must be dug into the ground if possible or secured differently. The cover is flame-retardant. However, under no circumstance should open fire or other sources of ignition come near the storage shelter. If the storage shelter is to be placed on a hard surface like concrete, you can secure the storage shelter with expansion bolts.

A storage shelter multiGarage provides easy access

A storage shelter is equipped with two doors in the same material as the cover, one in each end wall. The first door has three sturdy zips in full height – respectively the ridge and the side height. The other door is a roll up door, which can be opened up to side height. The PE cover has a 3-layer construction with an outer coating to prevent dirt build-up and to make cleaning easy.

Please note that the pictures serve as a guide. The number of zips on the door of the storage shelter may vary. It will not though affect the easy access or anything else.

Safety Advice